§ 118-1061. Dimension and area regulations.

Dimension and area regulations for industrial planned unit developments are as follows:

(1)

Area. Industrial planned unit developments shall contain at least five acres of land.

(2)

Street frontage. The minimum frontage for an industrial planned unit development on a single public street shall be 1,000 continuous feet.

(3)

Access points. All industrial planned unit development access points on a public street shall be located at least 600 feet apart and at least 600 feet from the intersection of any street right-of-way lines. The planning and zoning board may require wider spacing between access points and intersecting street right-of-way lines when the planned unit development has more than the minimum required frontage on a public street. All access points shall be specifically approved by the planning and zoning board.

(4)

Setbacks. All buildings shall be located at least 75 feet from all property lines and at least 75 feet from the right-of-way line of any street serving the industrial planned unit development. The planning and zoning board may reduce the required building setbacks where such buildings would be adjacent to railroad sidings if such reductions would not be detrimental to surrounding areas.

(5)

Height. No building shall exceed 50 feet in height.

(Code 1988, § 24-55(5))